Ardisam Eskimo Z43, Руководство оператора

Страница: 9 / 16

Page 9
Avoid injury! To avoid injury or death, never siphon
fuel by mouth.
CAUTION
Long Term Storage
•
If your ice auger will not be ran for more than one month,
prepare it for long term storage.
Steps for Long Term Storage
1. Add fuel stabilizer according to manufacturer’s
instructions.
2. Run engine for 10-15 minutes to ensure that the stabilizer
reaches the carburetor.
3. Remove the remainder of the fuel from the gas tank into
an approved fuel container.
4. Remove auger from powerhead and apply a thin layer of
grease to the output shaft (8913).
5. Store auger and powerhead (engine) in a vertical position.
6. Remove all debris from auger and powerhead (engine).
7. Attach blade protector to bottom of auger.
Avoid injury! Never store ice auger with fuel in the fuel
tank inside an enclosed area or building.
CAUTION
TRANSPORTING AND STORAGE
Transporting Your Ice Auger
1. Never transport engine inside an enclosed space or
vehicle. Fuel or fuel vapors may ignite causing serious
injury or death.
2. If fuel is present in the fuel tank, transport in an open
vehicle in an upright position.
3. If an enclosed vehicle must be used, remove gas into
an approved red gasoline container. DO NOT siphon by
mouth.
4. Run engine to use up the fuel in the carburetor and fuel
tank. Always run engine in a well ventilated area.
5. Wipe away any spilled fuel from engine and ice auger.
Allow to dry.