ARDETEM TPI-SI 40 Series, Руководство пользователя

Страница: 22 / 32

p21
CLrA
4.11.3 Menu : Deleting of the recorded alarms
If the function recording of alarms has been programmed :
After the setpoint has been passed, the state of the relay is recorded.
If the setpoint is passed back the other way, the state of the relay does
not change and the corresponding led starts to blink.
To revert to the normal state (led not blinking and relay in the correct
state), use menu CLEAr.
M
CLrA
the recorded alarms are
not deleted
deleting of the recorded
alarms, and revert to
measure display
Reminder:
If no key is pressed during 20 s.,
the instrument will revert to measure display.
Note : An exit from mode programming with saving of the configuration
will delete the recorded alarms.
If validation, reading of the
µconsole file (see page 19 )
during
1s.
if transfer
correct
if transfer
incorrect
LOAD 4.11.4 Menu : Teleloading of programming files
READ
CONS
COPY
µ
Co
µ
Co
µ
Co
µ
Co
LOAD
WAIT OK
or
ERR
PROG
OPT
ERR
PROG
M
Reminder:
If no key is pressed during 20 s., or if you press
the instrument will revert to measure display.
The file stored in the µconsole can be read by validating choice READ
CONS . In this case the reading organigramme of the file programming
is the same as for the programming of the instrument. ( see p7 )
Eg.: a file from a TPI-SI 41 A can not be copied to a TPI-SI 41 AR. For
the teleloading in the direction to be possible, the receiving
converter must have the same input and output options as the converter
on which the programming file has been copied.
Programming file incorrect : belongs to another type
of instrument
The file is not for instruments with the same options
as the instrument currently connected.
ERR
ERR
PROG
OPT
5.1 Functions which require pressing only 1 key:
a / Display of the min. value b/ Display of the max. value
INF
02.00
measure
display
Alternating infor-
mation display
Minimum value
5.
FUNCTIONS WHICH CAN BE ACCESSED
DIRECTLY FROM THE µCONSOLE DISPLAY
SUP
08.00
measure
display
Alternating infor-
mation display
Maximum value
c / Deleting of the minimum and maximum values
CLrM
measure
display
Deleting of the recorded min.
and max., and revert to
measure display
Saving of the TPI-SI programming in the µconsole memory.
Teleloading of the programming file contained in the µconsole
to the TPI-SI.
µ
Co