ARDET ORIX 70, Руководство по эксплуатации

Страница: 12 / 56

Pag.
12
OPERATING INSTRUCTIONS
ORIX 70
IDENTIFICATION LABES AND THEIR POSITIONS
1) Collimator: data are engraved on the collimator, indicating: identification number,
specifications, manufacturer name
2) X-ray control plate: located above the covering carter. It indicates: name of equipment, serial
number, manufacturer
3) Balanced spring arm plate (Pantograph arm): located in the back side of the holding hub of
the generator. It indicates: serial number, manufacturer
4) X-ray generator plate: located above the upper side of the ABS coverings of the generator. It
indicates: manufacturer, name of equipment, serial number, x-ray tube number, year of
manufacture.
5) Warning plate: located above the lower side of the ABS coverings of the generator, evidencing
the warning concerning the improper use of the equipment.