ARDESTO SDK-200S, Инструкция по эксплуатации

Страница: 12 / 20

12
BEFORE THE FIRST USE
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local
voltage before connecting the device. Voltage 220V-240V
50/60Hz)
Before using you appliance for first time, wipe off all
removable parts with a damp cloth. Never use abrasive
products.
USE
Use the setting button to choose the desired cutting width.
The cutting width is adjustable from 1 to 15 mm.
Slide the cradle to the left and place the food on the cradle.
Place the holder on the cradle; use this holder to push the
food slightly against the back cover.
Activate the device by using the on/off switch which is
located on the left side of the device.
NOTE: this appliance is equipped with a safety switch (A),
first bring the safety switch towards yourself then push
simultaneously the on/off switch and the appliance will
start. By pushing the on/off switch again the appliance will
stop.
ATTENTION!
Do never touch the blade, the blade is very
sharp and can injure you severely.
Slide the cradle slowly to the right against the rotating
blade. Capture the sliced food at the back of the device.
ATTENTION!
Never use the device without the holder, you
can seriously injure.
EN