Follow these simple steps:
Find a suitable container that you can soak your filter in.
It will be a good idea if you obtain one solely for this purpose.
*container size: approx 33cm in diameter and 25cm deep.
In about 4-5 Litres of HOT water, dissolve 250grams (2 ½ scoops) of
DET10 Cleaner/Sanitiser (or) Chlorinated dishwashing powder, as
recommended by manufacturer/supplier.
In the morning, wipe over the filter basket using a sponge or kitchen
cloth then thoroughly rinse it under running water.
Ensure to follow these instructions after each day the juicer is used to
avoid residue build up on your filter. For best results, it’s important to
ensure to make a fresh batch of solution every 4 to 5 days
Note: you may also clean the blade, lock nut & collection
pan in this solution to remove any build up and staining.
Rinse your filter under a stream of water removing as much of
the pulp stuck to it as possible. Submerge the filter directly into
the solution. It is important that you do not scrub or brush the
filter with any abrasive materials or cleaning aids. Allow it to
Soak Overnight
CARE & CLEANING
INSTRUCTIONS . . . .
Juice Extractor
RUBY 2000
Unit 7, 62-66 Newton Road, Wetherill Park, NSW 2164
P
02 97292011 |
F
02 97292012 |
E
DET10 Cleaner / Sanitiser (10kg drum) can be
purchased from Nutrifaster – Ph. 02 9729 2011 or
order by Email:
