arcweld 210C MIG, Руководство оператора, Страница: 21 / 31

E-2
OPERATION
E-2
Front Panel Controls
Model:
arcweld
®
250C MIG
1.
【
VRD Light
】
The machine is working in VRD voltage range when light is on.
2.
【
Power Light
】
This pilot lamp illuminates when the power source is on.
3.
【
Fault Light
】
This indicator will turn on when the machine is overheated, overvoltage or overcurrent. When the
indicator turns off, normal operation is again.
4.
【
Voltage display
】
MIG mode: For voltage preset before welding, and display actual voltage in welding.
MMA and TIG mode: Display actual voltage in welding.
5.
【
Mode switch
】
For switching welding mode:
Stick welding
MIG welding
TIG welding
6.
【
2T/4T Switch
】
In 2T MIG torch trigger functions in 2 step on/off. In 4T the MIG torch trigger functions in 4 step
on / let the trigger go welding will continue until the trigger is closed again and released / off.
7.
【
ARC CONTROL Knob
】
For inductance adjustment in MIG mode. Reduce to soften the arc or increase for crisp arc
1 2