VMX Series Manual
page 25
rev 1.06
1.
Select the controller you would like write data to. You can also select
internal HMI memory
2.
Select from the available parameters of the controller to read from. Note that
the data format of the object accessing the parameter must match the data
type of the parameter to avoid misinterpretation of data.
3.
Select from the possible variables given the selected parameter. In many
cases there is only one possibility.
l.
Max: Maximum allowable value for this object. This field can be left blank.
m.
Min: Minimum allowable value for this object. This field can be left blank.
n.
Notification: Select a bit address to turn on when this button is pressed. This
field can be left blank.
Format
a.
Decimal Pos: The position of the decimal point (starts counting from right to
left).
b.
Leading Zeros: Check to prepend leading zeros to the value displayed in
order to keep the number of displayed digits the same at all times.
c.
DEC: Select to display data in decimal
d.
HEX: Select to display data in hexadecimal
e.
32 Bits Float: Select to display data in IEEE 32-bit floating point
Содержание VMX Series
