- 8 -
ARCTIV iPDU User Manual M-0010--Rev 2
3. HARRDWARE INSTRUCTIONS
3.1
Network Module
Item
Function
Instruction
RUN
RUN Indicator
Status: Flashing every second
kWh
kWh Indicator
Status: Flashing frequency depends on the
connected load
ALM
Alarm Indicator
Status: Flashing when threshold is
exceeded
NET
Ethernet Port
LAN / WAN communication port
SER
Serial Port
RS-485 Serial communication port
IN
Daisy-Chain Port Connect to the OUT port of previous iPDU
OUT
Daisy-Chain Port Connect to the IN port of the next iPDU
CONTROL Control Button
Press to view the iPDU status &
configuration. Restore to factory settings:
Press and hold the control button, then
press RESET button to restore to factory
settings.
UP
Page Up
Scroll up to the previous page
DOWN
Page Down
Scroll down to the new page
RESET
RESET Button
Restart system
LCD
Screen
View Status
Display the power data and alarm status
T/H
Temp / Humid
Sensor Port
Connect to temperature & humidity sensors
3.
2
System Initialization
When powering on the PDU, the boot animation starts, then the buzzer sounds
and the RUN indicator flashes. It starts in the normal working mode, after the
unit has initialized and the LCD has started displaying the power data.
Press the UP/DOWN button to view the PDU information including the input
voltage / current / power consumption of each phase, temperature/humidity
status, baud rate, Modbus communication code, Daisy chain code, IP address
and device series.