Arctiko ULUF P390, Оригинальная инструкция по эксплуатации, Страница: 23 / 25

45 44
Defrosting
This appliance does not have automatic defrost, therefore you have to
perform defrosting by following these instructions:
Defrost the appliance at least twice a year.
1. If the appliance is loaded with samples or products, move these to another
appliance to maintain the temperature of the products.
2. Turn off the appliance on the display by pressing the STANDBY
button.
3. Unplug the main power cable from the power socket.
4. Open the door of the appliance.
5. Place cloths or towels in the bottom of the appliance to collect any
defrost water.
ATTENTION !
Do not use abrasive nor chlorine-containing products to clean the appliance.
Cleaning
Perform following instructions at least once a month:
- Always keep the appliance free of ice. Use a soft cloth or brush to remove
loose ice. Never use sharp tools and be cautious not to damage the
gaskets. Keeping the appliance free of ice will extend its lifespan.
- Clean the outside and inside of the appliance using a dry, soft cloth or a soft
cloth with a solution of water and mild detergent. If a thorough cleaning or
disinfection is required, we recommend using ethanol.
- Clean all gaskets using a damp cloth and if necessary a mild
detergent. Remove dirt and wipe with a dry cloth afterwards. Do not pour
water into the appliance. By doing so, the water can damage the insulation
materials and electrical components.
- Dust off the inside of the compressor compartment using only a dry brush
or a vacuum cleaner. Parts in the refrigeration system for this appliance are
completely sealed. These do not require any lubrication.
If you would like more information about your device or you would like to
purchase spare parts or additional equipment, please contact your local
distributor. Always have serial number and model handy for the appliance you
are referring to when contacting the distributor.
For warranty information, Arctiko refers to your distributors terms and
conditions.
Spare parts
For requirements of spare parts, contact your Arctiko distributor. Please
inform the serial number of the appliance and model when contacting the
distributor.
Arctiko strive for day-to-day delivery of spare parts. However, some special
parts may take longer due to production time. Arctiko guarantees availability
of spare parts for all appliances for at least 10 years after the delivery.
Service
Arctiko recommends that service is performed by authorized service
personnel at least once a year.
Contact your Arctiko distributor for contact information. Always have the
serial number of the appliance and model ready for the distributor.
Warranty
After-sales
6. Leave the appliance open for a minimum of 24 hours allowing the ice to
melt.
7. When the defrosting is completed thoroughly clean the appliance inside.
Wipe off all remaining water and leave the door open until the cabinet is
completely dry.
8. Connect the main power cable to the power socket and switch on the
appliance on the display.
9. Reload the appliance after reaching the set temperature (pull down).