Arctiko ULUF P390, Оригинальная инструкция по эксплуатации, Страница: 19 / 25

37 36
Default settings
D De essccrriip pttiio onn U Unniitt D De effaauulltt sse ettttiinng g
Setpoint °C -80,0
LLiim miittss ((A Allaarrm mss))
Low temp. °C -99.0
High temp. °C -65.0
Delay Minutes 15
Door Seconds 40
Ecomode OFF
D Diissp pllaayy
Screensaver Hours 0
Buzzer ON
User password Deactivated by
default
Admin password 111
The backup menu transfers the thermoregulation data on usb pen.
Pressing the backup icon shows the usb-pen insertion request frame with
20-second time-out. If the usb-pen has been recognised, the setting page
of the months to download is displayed, otherwise the display goes back to
the SETTINGS MENU.
The up/dw keys increase/decrease the number of months to transfer;
pressing the enter key starts the data download with the progress bar; at the
end, it goes back to the setting menu. The escape key leads to the settings
menu without transferring the data.
Data download
Attention!
Do not remove the USB drive while transferring data. Wait for the “V” icon to show
before removing the drive.