Arctiko SUF 100, Руководство по эксплуатации, Страница: 17 / 20

Cleaning and maintenance of the freezer
1. Ice will form on the sub lids in the freezer. This ice should be removed with a scraper at regular
intervals. (Remember safety gloves).
2. Ice on the inside of the box should be removed as required, as it reduces the cooling capacity!
Take the contents out of the freezer. Pull out the plug and leave the lid open until the ice can be
removed. (Remember safety gloves).
3. Dry the inner container with a cloth until it is not damp any longer!
4. Clean the outside of the freezer with a damp cloth. Be careful not to get damp (water) on the
electrical parts or water into the vent holes, as water and damp may damage the electrical
parts and cause the freezer to short-circuit!
5. The ice formed on the inside of the lid should be removed with a wooden/plastic scraper. This ice will
build up because of the low temperatures inside the box, and if it is not removed it will
cause the lid to open.
6. Use authorised cleaning products. The use of alcohol, dissolvents and alkaline cleaning agents
is prohibited.
7. Clean the vent holes on the rear condenser with a vacuum cleaner at least once a year
(see the sketches).
Do not put bottles containing carbonic acid or inflammable products in the freezer.
WARNING
Before carrying out maintenance, unplug the appliance.
Do not use abrasive products; stain removers (e.g. acetone, trichloroethylene) to clean the appliance.
Spare parts
When ordering spare parts that you can easily fit yourself, please give unit type number and the function of
the part(s) concerned.
Disposal of the freezer
To prevent harmful environmental effects, contact the distributor and ask where the freezer should be
delivered.
Remove the locking function so that children cannot be locked in the freezer whilst playing.
You can obtain information on the disposal of refrigeration appliances from:
•
Your supplier
• Authorities (The Local council, Ministry of the Environment, etc.)
17