Arctiko CRYO 170-0, Руководство по эксплуатации, Страница: 9 / 24

7
GB
Before commissioning
Warning
Do not put bagged ice packs (including those containing
ammonium nitrate and urea) in the freezer. Leakages from such
bags may cause rust or breakdown of the freezer.
Do not place any form of volatile substance or inflammable, such
as ether, benzene, alcohol, propane gas and glue, etc. inside the
freezer. Failure to follow these instructions may lead to
explosions or fire.
Any type of bottle or can that contains liquid that can be frozen
should never be stored in the freezer since the bottles and cans
may explode. This can lead to personal injury.
Do not touch stored materials, containers (especially metallic ones),
or the inside of the freezer with bare or wet hands. Failure to
follow these instructions may lead to frostbite. Make sure to wear
gloves when working.
1. Install the freezer on a flat and level floor.
Install the freezer on a level floor.
The front side of the freezer should be approximately 1cm higher than the back
side.
2. Clean the inside of the freezer and put the sub-lids.
4. Before storing anything, make sure the inside of the freezer is
fully cooled down.
The plastic odor will disappear once the freezer cools down.
3. Connect the freezer to the exclusive power outlet.
Do not connect the power cord in the middle, or do not use extension cords, or do
not use any electric outlet divider.
Do not turn on the power for 30 minutes after moving, which may cause breakdown.