Arctiko CRYO 170-0, Руководство по эксплуатации, Страница: 19 / 24

1
GB
Moving and Reinstalling the Freezer
When you need to move the appliance, consult your sales agency or
qualified experts. Imperfect reinstallation may cause electric
shocks or fire.
When you need to move the appliance, make sure not to tilt it or let it fall
over. Failure to follow these instructions may lead to personal injury and/or
property damage.
When you need to move the appliance, pull out the power plug from the
outlet, taking care not to damage the power cord. Damage to the cord may
lead to electric shocks or fire.
Before moving the appliance, remove all stored materials from the freezer.
When you need to move the appliance, do not lay it on its side, since this
may became a cause of a breakdown.
Power cut
Limit door opening as much as possible.
Do not put any new materials into the freezer. It will make the inside
temperature higher.
Disposal of the appliance
Remove the door hinges and the gasket.
Do not leave the appliance in a place to which children have easy access.
Contact a qualified scrap merchant for disposal.
Turning off the appliance for long periods
Clean the inside of the freezer and leave the doors open for 2~3 days until
the inside is completely dry in order to avoid mold or unpleasant odors.
If you leave the damage as it is, rust will occur. Take action immediately.
(Simple measures)
Seal a small damaged area.
Cover with a water-proof wall paper for a big damage area (First, remove
any rust with sandpaper).
Repair of scatches on the painted surface