Arctiko CRYO 170-0, Руководство по эксплуатации, Страница: 8 / 24

6
GB
Installation
Installation should only be performed by a qualified expert from the sales agency or
elsewhere. Imperfect installation may result in water leakage, electrical leakage,
electric shocks, or fire.
Choose an area with low levels of both heat and moisture.
The cooling performance of the freezer may be adversely affected if it is placed in
direct sunlight or near a source of high temperatures.
If moisture or water comes into contact with the freezer, it may be a cause of poor
electrical isolation or rust.
Allow adequate space around the freezer
Lack of space may cause poor cooling performance, breakdown of the freezer, or
overuse of electricity.
Allow at least 15cm from the back wall of the freezer, and at least 10cm from the side walls.
There should be a space of at least 50cm between the top of the freezer and the ceiling.
Electric Leakage Breaker
If installation in a damp area is unavoidable, the use of an electric leakage breaker
is strongly required.
Install the freezer on a firm and level floor
To stabilize the freezer, turn the adjustable feet (front side only) clockwise until they
make firm contact with the floor.
If the freezer is not stabilized correctly, it may cause unusual noises and vibrations.
Ground the freezer to prevent electric shocks
The power plug used for this appliance comes with a ground. Make sure to use an
earthed power outlet. Imperfect grounding may lead to electric shocks.
If there is no existing earthed power outlet, it will be necessary to have one
installed by a qualified electrician.
Do not connect the grounding conductor to the following objects.
Water or gas pipes (This may cause explosions or fire.)
Lightning rods or phone cables (This may cause serious injury or death if lightning
strikes.)