Arctic Cove MODF001 Скачать руководство пользователя страница 11

7 — English

OPERATION

USING THE MISTING FAN

See Figures 18 - 19.

WARNING:

Ensure that the misting fan does not leak water. Leaks 
can result in a slippery surface and create a slip and fall 
hazard.

WARNING:

Always route hoses away from traffic areas to prevent a 
tripping hazard.

 

Set the misting fan in your desired location, away from 
the electrical devices and switches.

 

With the faucet turned completely off, attach a garden 
hose (not provided) to the misting tube coupler and hand 
tighten.

 

NOTE: 

Make sure there are no kinks or leaks in the hose.

 

Turn the faucet on and allow the system to pressurize.

 

After adequate pressure is reached, turn the misting valve 
clockwise to turn on the misting feature. 

WARNING:

Disconnect the misting fan from the power source and 
keep hands away from areas between the upper and 
lower poles and the upper pole and motor head when 
making adjustments. Failure to follow these instructions 
can result in possible accidental starting, electric shock, 
a  hazard, or other serious personal injury.

To tilt the fan:

 

From the back of the fan, loosen both fan adjusting knobs.

 

Tilt the fan to the desired position.

 

Retighten both fan adjusting knobs securely.

To change fan height:

 

From the back of the fan, loosen the height adjusting 
knob.

 

Raise or lower the upper pole to the desired position.

 

Retighten the height adjusting knobs securely.

To turn the fan on:

 

Plug the electrical cord into an outlet or extension cord. 

 

With the faucet on, allow the system to pressurize.

 

Rotate the on/off switch clockwise to the 

(low) position 

to turn the fan on.

 

NOTE: 

The misting fan has three speeds: low (I), medium 

(II), or high (III). Select the desired speed by rotating the 
on/off switch left and right.

 

Turn the misting valve on. 

To use the oscillating feature:

The fan head can be either stationary or made to oscillate 
left and right. Pull the oscillating knob straight up to make 
the fan rotate or push it down to keep the fan in one position. 

To turn the fan off:

 

Turn the misting valve off. 

 

Rotate the on/off switch counterclockwise to the 

O

 (off) 

position to turn the fan off.

 

Unplug the fan.

 

Turn off garden hose.

Содержание MODF001

































Отзывы: