![Arctic Cat F 1100 series Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/arctic-cat/f-1100-series/f-1100-series_operators-manual_2965215014.webp)
10
PC016A
NOTE: When air can no longer be
heard purging from oil pump bleed,
tighten the bleed bolt to 7.5 ft-lb.
3. Start the engine. The warning icon
should go out within five seconds. If the
warning icon goes out, check oil level.
4. If the warning icon does not go out,
shut the engine off immediately and
repeat step 2; then repeat step 3.
If the warning icon does not go out or if
the engine does not start, take the snow-
mobile to an authorized Arctic Cat Snow-
mobile dealer. If not under warranty, this
service is at the discretion and expense of
the snowmobile owner.
Indicator Icons (Deluxe
Gauge)
Certain models are equipped with a deluxe
gauge combination speedometer/tachome-
ter. Indicator icons are incorporated within
the speedometer/tachometer. Also incorpo-
rated into the speedometer/tachometer is a
digital readout screen.
FZ001A
A. High Beam
B. Oil Pressure/Low Oil
C. Coolant Temperature
D. Increment Button
E. Select Button
F. Decrement Button
G. Service
H. Charging System (1100 cc Mod-
els)
RPM/MPH (kph)
By pushing the increment button once,
the RPM and MPH will be displayed
(one on the readout screen and one with
the needle). By pushing the button once
again, the functions will be reversed.
By pushing the increment button (with
speed being displayed) for more than two
seconds, the display will change between
standard mph or metric kph.
With RPM displayed on the readout
screen by pushing and holding the incre-
ment button, maximum RPM will be dis-
played on the readout screen. The
maximum RPM readout will reset when
the decrement button is pushed (while
maximum RPM is displayed).
Odometer/Trip-Meter (1)/
Trip-Meter (2)/Hour-Meter
By pushing the decrement button, the
readout screen will display odometer,
trip-meter (1), trip-meter (2), and hour-
meter. To reset the trip meter with the trip
meter displayed, push and hold the decre-
ment button until the display is cleared.
The hour-meter readout will not reset.
Clock/Altimeter
By pushing the select button, the readout
screen will display clock, altimeter, and
maximum altimeter.
To set the clock, select clock on the display
by pushing and holding the select button
for two seconds; the option of selecting the
12-hour or 24-hour clock mode is avail-
able. Push the increment button to toggle
between the 12-hour display and the 24-
hour display. When desired mode is dis-
played, push the select button.
CAUTION
Do not attempt to start the engine
with the bleed bolt open.
Содержание F 1100 series
Страница 7: ...3 Snowmobile Safety Rules...