Arctic Cat 500 4x4, Руководство оператора

Страница: 46 / 76

���������� ����������� �������� �����������������
������ ��� ��
��������������� ��
������� ��� � ��� ����������
���������� ������������
Page 44
!! WARNING !!
The use of worn-out tires can be
dangerous and can increase the
risk of an accident.
Tire Replacement
The ATV has low-pressure tubeless
tires. Air is sealed by the contact
surfaces of the inner wheel rim
and the tire bead. If either the inner
wheel rim or tire bead is damaged,
air may leak. Be extremely careful
not to damage these areas when
replacing tires. If proper tools and
related items are not available,
have this maintenance performed
by an authorized Arctic Cat ATV
dealer.
!! CAUTION !!
When breaking the tire bead loose
from the wheel, be extremely care-
ful not to damage the inner wheel
surface or the tire bead.
Front/Rear Wheel Removal
• Park the ATV on level ground and
engage the parking brake.
• Loosen the lug nuts.
• Elevate the ATV by placing a jack
under the axle.
• Remove the wheel
• Install the wheel and install the
lug nuts.
• Tighten the nuts to 65 Nm
• Remove the jack.
Headlight
q NOTE
The bulb portion of the headlight is
fragile. When replacing the head-
light bulb, do not touch the glass
portion of the bulb. If the glass is
touched, it must be cleaned with a
dry cloth.
To replace the headlight bulb, use
the following procedure:
• Remove the sealing and the re-
tainer.
• Retract the bulb housing from the
retainer and remove the bulb.
• Install the new bulb .
• Install the bulb housing in rever-
se order.
!! CAUTION !!
When replacing the headlight bulb,
be careful not to touch the glass
portion of the bulb. If the glass is
touched, it must be cleaned with a
dry cloth.