Arctic Cat 500 4x4, Руководство оператора

Страница: 19 / 76

���������� ����������� �������� �����������������
������ ��� ��
��������������� ��
������� ��� � ��� ����������
���������� ������������
Page 17
!! WARNING !!
The high range is for normal riding
with light loads. The low range is
for carrying heavy loads or trailer
towing. Compared to HIGH range,
the LOW range position provides
slower speed and greater torque to
the wheels.
3. To engage reverse gear from
neutral, move the shift lever out-
ward and rearward into the R po-
sition.
!! CAUTION !!
Always come to a complete stop
before attempting to shift from one
range to the other or into reverse.
Always shift on level ground, or
engage the parking brake before
shifting into another range or into
reverse.
Brake burnishing procedure
The service brake is activated by
the foot pedal (according to direc-
tive 93/14A EC homologation) or
via the left hand brake lever (both
hydraulic). The right hand lever
only activates the parking/auxiliary
brake which must not be used as
service brake.
!! IMPORTANT !!
For perfect brake efficiency you
have to burnish the brake pads.
To do so, please follow the instruc-
tions below:
Choose an area sufficiently large
to safely accelerate your ATV to 30
km/h.
Accelerate to 30 km/h, then com-
press brake lever to decelerate to
0 – 5 km/h.
Repeat this procedure approx. 20
times until brakes are heated up.
!! WARNING !!
Please note that new brake pads
have to be prepared. Don’t put
yourself into situations that require
an immediate braking unless the
brake pads are working properly
(this may result in serious acci-
dents!).
When using the hydraulic brakes,
you must be familiar with the follo-
wing points:
Braking
1 = R
2 = N
3 = H
4 = L