34
ATV Operation
Active riding and basic maneuvers are
the foundation of your ride. Without
basic skills, it’s impossible to move to
this level — active riding. These are your
basic maneuvers:
• Mounting the TRV (Operator)
• Mounting the TRV (Passenger)
• Starting the Engine
• Starting a Cold Engine
• Varying Temperature Adjustments
• Shifting
• Braking/Stopping
• Parking
• Dismounting the TRV
Mounting the TRV
(Operator)
1. From the left side, grab the left-side
handlebar, apply the brake, and put
your left foot on the footrest.
2. Grab the right-side handlebar.
3. Swing your leg over the seat and set
your right foot down on the right-side
footrest.
4. Get seated in a comfortable position.
5. Always keep your feet planted on the
footrests.
Mounting the TRV
(Passenger)
1. After the operator is seated and has
the brake firmly applied, with your
left hand, grasp the left shoulder of
the operator, and with your right hand
grasp the backrest; then swing your
leg over the seat and set your right
foot down on the right-side footrest.
2. Get seated in a comfortable position
and keep hands firmly on the hand-
holds.
3. Always keep your feet planted on the
footrests.
Starting the Engine
Always start with the ATV on a flat, level
surface. Carbon monoxide poisoning can
kill you, so keep your ATV outside while it’s
running. Follow these steps to start it up:
1. Mount the ATV and sit down.
2. Engage the brake lever lock.
3. Turn on the ignition.
4. Shift into neutral.
5. Move the emergency stop switch to
RUN.
6. When the glow plug indicator light
goes off, press the starter button.
7. Let the engine warm up.
Starting A Cold Engine
1. Turn off all electrical accessories
(hand warmer, lights, etc.); then
rotate the ignition switch key to the
first position (ON) leaving the head-
lights OFF. Note that the N is indi-
cated on the LCD and the glow plug
indicator light is illuminated.
2. When the glow plug indicator light
goes off, press the starter button.
NOTE: At temperatures below
-10° C (14° F), turn the ignition key
off and then on to recycle the glow
plug. This will simplify starting in
cold weather.
Basic Operating
Maneuvers
CAUTION
Do not run the starter motor for more
than eight seconds per starting
attempt. The starter motor may over-
heat causing severe starter motor
damage. Allow 15 seconds between
starting attempts to allow the starter
motor to cool.
CAUTION
Do not run the starter motor for more
than eight seconds per starting
attempt. The starter motor may over-
heat causing severe starter motor
damage. Allow 15 seconds between
starting attempts to allow the starter
motor to cool.
Содержание 2012 700 Diesel
Страница 78: ...76 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES ...
Страница 85: ...83 NOTES ...
Страница 86: ...84 NOTES ...