®
Battery Installation:
1. Line up the edges as shown (Fig. 2).
2. Slide the battery into the blower.
3. Make sure there is an audible click as the battery locks into the blower.
2.3 Filters
Read the enclosed NIOSH approval labels for proper part selection
before installing the filter into your
A
RC
O
NE
®
A
IR
P
LUS
®
PAPR
system
.
Change the HE filter when it becomes dirty or when proper
airflow cannot be maintained (see Section 2.5 Airflow Test).
THIS FILTER IS NOT MEANT TO BE REUSED. DO NOT CLEAN AND
REUSE. THE FILTER SHOULD NEVER BE USED FOR PROTECTION
AGAINST GASES OR VAPORS. REFER TO SPECIFIC NIOSH FILTER
APPROVAL LABELS FOR SPECIFIC INFORMATION ON USAGE AND
LIMITATIONS.
PD F created w ith pdfFactory t
rial version
www.pdffactory.com
BLOWER
BATTERY
BATTERY EDGES
(LINE UP BOTH SIDES)
BLOWER EDGES
(LINE UP BOTH SIDES)
Figure 2
-7-
Figure 3
Figure 4
Pull Tab on
Cover Away
from Blower
(pull the right
side of cover)
Figure 5
Filter fits over
motor cap
HE Filter
Insert onto blower
Blower
