ZyWAN User Manual
Configuring the ZyWAN
© 2008 Arcom Issue D
91
The
Serial Ports Table
is part of the Terminal Server configuration. At least one row
must be configured in the
Serial Ports Table
for it to work properly:
The following buttons are available:
Button
Explanation
Insert Row#
Each row of the
Serial Ports Table
contains the definition of a
serial port to use for this Terminal Server configuration. One
Terminal Server may send data received from the network client
to multiple serial ports simultaneously. In order to insert a row in
the table, enter a number in the box between 1 and one greater
than the highest number of rows. Then click the
Insert Row#
button to insert a blank row. This row must be filled in with all data
required.
Note that when adding or deleting rows of a Serial Ports Table,
make sure to click the
Insert Row#
or
Delete Row#
buttons
within the brown section of the Serial Ports Table, not the buttons
at the very bottom of the main table.
Delete Row#
In order to delete a row of the
Serial Ports Table
, enter a number
in the box between 1 and the highest number of rows. Then click
the
Delete Row#
button to delete the row. Once a row is deleted,
it cannot be restored without inserting a row and entering the data
again.