ZyWAN User Manual
Getting started with your ZyWAN
© 2008 Arcom Issue D
30
4
Make the following settings for the serial communication, then click the
OK
button:
5
If the ZyWAN is already started, press the
Enter
key to get a login prompt. The
default login is
root
and the default password is
arcom
(case-sensitive).
6
After logging into the ZyWAN, type the command
ifconfig eth1
at the command
prompt. This shows the current network address which has been assigned to the
ZyWAN by the network:
If the
ifconfig
command does not show an
inet addr
address, it may be
that the network does not have a DHCP server, or that security policies
prohibit the ZyWAN from obtaining its address. An address can be
manually set if necessary, by issuing the following command:
ifconfig eth1
ip_address
netmask
subnet
where
ip_address
is the actual address on the network,
and
subnet
is the subnet mask in dotted notation (such as 255.255.0.0).