ArchWorks ARCMASTER 436, Руководство пользователя, Страница: 42 / 48

ARCMASTER 436
18
5.6 STATIC configuration
To create the programs from [ LINEA 1 - LINEA 4 ]:
• Press the MENU button until the display shows [ PLAY STATIC ], then press the SET button.
• Select cool, warm, dimmer and strobe ( Cool - Warm - Dimm - Strob ) through the UP and DOWN.
• To confirm press the SET button.
• Set the values ( 000 - 255 ), through the UP and DOWN.
5.7 Mood
To set the effect on the white proceed as follows:
• Press the MENU button until the display shows [ MOOD ], then press the SET button.
• Select the effect to be adjusted with [ WARM ], [ NATURAL ] and [ COOL ].
• The values ( 000 - 255 ) can be selected using the UP and DOWN.
• Press the SET button to save your changes.
5.8 Play schedule
To run the program select this command:
• Press the MENU button until the display shows [ PLAY SCHEDULE ] and activate Playing Schedule.
5.9 Schedule
To enter the programming mode the following:
• Press the MENU button until the display shows [ SCHED ], then press the SET button.
• Select the day of the execution of the programming of SUNDAY , MONDAY , TUESDAY , WEDNESDAY , THURSDAY , FRI-
DAY , SATURDAY and EVERYDAY .
• Select the program from White 1 and White 5 .
• Set the start time and end that run.
Note - If there is conflict in set periods, the first scheduled event has priority over the second event. Moreo-
ver, if there is no conflict between the Everyday mode and one day of the week, the latter shall prevail.
5.10 Settings
• Press the MENU button and select the item using the arrow keys [ SET ] to confirm press the SET button.
You can access the following functions:
PASSWORD
• Enter the [ PASSWORD ] to enable or disable the password.
- If you select On, the unit’s operation will be password protected after 30 seconds of inactivity.
- If you select Off, you can operate freely at all times.
-
RESET ALL
• This function restores all the original factory settings.