ARCMASTER 436
10
4.2 Operation in automatic mode
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
•
Press the button MENU so many times until the display shows [
AUTO
], then press the button SET.
•
Press the button UP and DOWN to switch between the programs 1 to 10 (
RGB 01 - RGB 10
and
RGBL 01 -
RGBL10
).
•
The unit will operate in automatic mode by executing the selected program.
IMPORTANT
RGB 01 - RGB 10 =
control of all lines to paly effects with RGB fixtures.
RGBL 01 - RGBL 10 =
control of different lines to paly effects with RGB fixtures.
Note - If
ALLOW EDIT
from [
SET
] menu is Yes ,after selecting an [
AUTO]
program, the user then presses
SET
again,
they can change the speed of the
AUTO PROGRAMS.
4.3 Custom program
Programs
CUSTOM01 - CUSTOM10
are set by customer and can be edited in EDIT CUSTOM mode.
•
Press the button MENU so many times until the display shows [
PLAY CUSTOM
], then press the button SET.
•
Press the button UP and DOWN to switch between the programs 1 to 10 (
CUSTOM1 - CUSTOM10
).
•
The unit will operate in automatic mode by executing the selected program.
4.4 STATIC configuration
To create color combinations enter in static mode:
•
Press the MENU button until the display shows [
STAT
], then press the SET button.
•
Select the red channel, green, or blue (
Red - Green -Blue
) using the UP and DOWN.
•
To confirm press SET button.
•
Set the values (000 - 255), through the UP and DOWN.
•
Finally, set the value of the functions [
Dimm
] and [
Strobe
] using the UP and DOWN.
4.5 Master/Slave Mode
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as (
SLAVE
) with the same effect.
•
Press the button MENU so many times until the display shows [
OPERATION
], and press the button SET to
confirm.
•
Press UP and DOWN to set the unit as [
SLAVE
].
•
Select the desired program (see section 4.2).
•
Use the signal connectors to form a chain of units. Under certain conditions and lengths is recommend-
ed that a termination.
4.6 Easy play Mode
For the management of LED projectors with simple controllers:
•
Press the button MENU until display show [
OPERATION
], then press the button SET to confirm.
•
Press UP or DOWN and select [
EASY PLAY
] mode.
•
Press the button SET to confirm.
Содержание ARCMASTER 436
