11
ARCMASTER 436
4.7 DMX configurations
ARCMASTER136 is equipped with 7 DMX configuration.
•
Press the button MENU so many times until shows [
PERSONALITY
], and press the button SET to confirm.
•
Select the desired DMX configuration (
EFFECT - RGB - RGB+D - RGB+DMS - RGB+LINE - RGB+LINE+DMS - SOLID
)
through the buttons UP and DOWN.
The tables on page 12 indicate the operating mode and DMX value.
4.8 DMX Mode
•
Press the button MENU so many times until the display shows [
OPERATION
].
•
Press the button SET to confirm.
•
Press the buttons UP and DOWN to select [
DMX
] mode.
•
Then enter the [
DMX
] mode, press the buttons UP and DOWN to select the desired value [
001 - 512
].
•
After the setting value is automatically saved.
Note - When fixtures are under Auto program operation, the [
RUN
] mode does no works.
4.9 DMX addressing
In order to control units connected with a DMX controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the unit. The other functions of the light effect panel are then automatically
assigned to the following addresses. An example with the start address 33 is shown below and a configura-
tion with 9 DMX channels:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
9
33
33-41
42
51
60
Содержание ARCMASTER 436
