![Architect 1600 SE Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/architect/1600-se/1600-se_professional-installers-consciousness-manual_2964178023.webp)
Architect
Model 1600 SE
Model 1601 SE
installer’s Guide
™
A common problem with amplifiers is their
In-Rush
current.
That is the extra power that the amplifier draws from the AC wall
outlet when you turn on the amplifier. A single 15 amp household
circuit may be fine for running a couple Brand X amplifiers under
normal operation, but when they are first turned on, the combined
in-rush current draw is usually enough to pop the house circuit
breaker. This is a major problem in areas where there are frequent
brown-outs or power fluctuations. Our patented (U.S. Patent
#5,708,577) power supply design smoothly ramps up the Archi-
tect from a cold start. This keeps the in-rush current under control
and means you don’t have to over rate the AC feed just to keep
breakers from blowing during a brownout.
LightDrive
ProTECTIon SYSTEm
This amplifier is not only smart enough to protect itself, the
Architect™ Model 1600 SE Series amplifiers also protects the
speakers. When the volume is turned up too high and an ampli-
fier is pushed into clipping; the resulting distortion will probably
damage the tweeters in your speakers. AudioControl’s exclusive
LightDrive
protection system eliminates the possibility of sig-
nal clipping in the Architect, even under the most demanding of
conditions.
What is clipping? That’s where the speaker output of an
amplifier tries to exceed the available voltage of the amplifier’s
power supply. When that occurs, the amplifier can no longer
properly create the audio signal waveform and the audio output
becomes sharply squared off. This abrupt cutoff creates ultrason-
ics and high frequency distortion that is too much for a poor little
speaker like a tweeter to handle.
LightDrive
solves this problem
by continuously monitoring the output of the amplifier channels.
If a channel begins to get near the limit of the power supply, it
immediately begins compressing the audio to reduce the volume
level. This happens so quickly that you’ll never even hear the
LightDrive
system kick in…although your speaker will breathe a
sigh of relief because it did.
19
Normal Amplifier
Amplifier with Lightdrive
What’s inside
Содержание 1600 SE
Страница 4: ...The Architect Model 1600 SE Model 1601 SE...
Страница 16: ...12 Installation The Long Version Using the 12V trigger for local source selection...
Страница 34: ...Block Diagram 30...