12 | EN
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or
come into contact with hot parts
of the appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
The mains supply data must
correspond to the data specified on
the rating plate of the appliance. The
rating plate is located at the rear
housing of the appliance.
The supply cable of the appliance
must correspond to the specifications;
see technical data table
Technical
specifications, page 5
.
The plug should be easily
accessible after installation (but
not above the hob).
Plug the mains lead into the socket.
Final check
1. Turn on gas supply.
2. Check gas installations for secure
fitting and tightness.
3. Ignite burners and check
appearance of the flame.
The flames should be blue and
burn smoothly. If the flames
appear yellowish, check secure
position of the burner cap or
clean the burner. Switch off gas
and let burner cool before
touching it.