/
51
/
60
EN
Operating the product
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Rinse aid indicator ( )
Please check the no rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid dispenser with rinse aid
whenever the ‘no rinse aid’ warning
symbol lights.
C
Rinse aid warning will go
off automatically once the
programme is started.
Water Cut-off Indicator ( )
1 Water Cut-off warning indicator will
light when the machine cannot take
in water. When the water is supplied
again, warning light will be turned off
automatically.
A
Make sure that the water
is not cut-off and the tap is
not closed when the Water
Cut-off warning light is
illuminated. Call Authorised
Service Agent if water is not
cut-off and the tap is open.
End of programme
End of Programme indicator will light
up once the washing programme is
over.
1. Press the On/Off key to switch off
your machine.
2. Close the tap.
3. Unplug the machine from the
socket.
C
For energy saving, the
machine is automatically
switched off following
the completion of the
programme or when the
programme is not started.
C
Leave your dishes in the
machine for about 15
minutes after they are
washed in order to have
them cooled. Your dishes
will dry in a shorter time
if you leave the door of
your machine ajar during
this period. This process
will increase the drying
effectiveness of your
machine.
Adjusting the amount of rinse
aid
1. After switching your machine on,
press the Settings key until the
countdown 3, 2, 1 is completed on
the display.
2. Press Programme key to move to
position (P) on the display.
3. Set to the appropriate level with the
Time Delay key.
4. Press On / Off key to save the
setting.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in
P:2 position.
3 doses of rinse aid are dispensed in
P:3 position.
4 doses of rinse aid are dispensed in
P:4 position.
