50
/
/
60
EN
Operating the product
Child (Key) Lock
You can prevent other people from
affecting and changing the programme
flow and time delay while the machine
is running.
To activate the child lock:
1. Press and hold the Child lock key
for three seconds.
2. Display Information line shows “3”,
“2”, “1”. Key Lock indicator turns
on.
C
Child lock prevents the
selected programme
or functions from being
changed and disables the
Start / Pause / Cancel key.
C
Child lock does not lock the
door of the machine.
C
If you switch your machine
off by using On/Off key at the
end of the programme, the
child lock will be deactivated
automatically.
To cancel the child lock:
1. Press and hold the Child lock key
for 3 seconds.
2. Display Information line shows “3”,
“2”, “1”. Key Lock indicator turns
off.
Cancelling the programme
1. Press and hold the Start / Pause /
Cancel key for 3 seconds to cancel
the programme.
2. Release the key when the Start /
Pause indicator starts flashing. For
a couple of minutes the machine
will fulfill the necessary operations
required to cancel the programme.
C
You can select and operate
a new programme after
the cancellation of the
programme.
C
There might be residues of
detergent or rinse aid left
in the machine and/or on
the pieces being washed
depending on the step in
which the programme has
been cancelled.
Changing a programme
To change a running programme, you
should cancel the programme in the
first place. Then, you can select and
start a new programme.
Overflowing Warning
If the machine intakes
too much water or there is leakage
at any of the components then the
machine will detect this and E:01 icon
will flash on the Programme indicator.
As long as the overflowing continues
safety algorithm will be active and try
to discharge the water. If overflowing
stops and safety is assured, E:01
icon will disappear. If E:01 does not
disappear, there is a permanent fault.
In this case the authorised service
should be contacted.
Salt indicator ( )
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
