14
/
/
60
EN
Installation
After detecting the water hardness:
1. Press the On/Off key to turn on the machine. Press and hold the Settings key.
You will see the countdown “3, 2, 1” on the display and then the product will enter
the Settings menu.
2. After entering the Settings menu, press and hold the Programme Selection
knob until the stored water hardness level “r...” is displayed.
3. Refer to the “Water hardness level adjustment table” and press the Delayed
Start key to set the water hardness level you have measured. See “Water
hardness level adjustment table” for the correct water hardness level setting.
4. Press the On/Off key to store the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF
Water Hardness Level Indicator
Level 0
0-5
0-4
0-8
Press the Programme Selection knob to switch
the water hardness level to position 1. (r1)
Level 1
6-9
5-7
9-13
Level 2
10-15
8-12
14-22
Press the Programme Selection knob to switch
the water hardness level to position 2. (r2)
Level 3
16-19
13-15
23-27
Press the Programme Selection knob to switch
the water hardness level to position 3. (r3)
Level 4
20-24
16-19
28-34
Press the Programme Selection knob to switch
the water hardness level to position 4. (r4)
Level 5
25-62
20-50
35-90
Press the Programme Selection knob to switch
the water hardness level to position 5. (r5)
Perform the same hardness level adjustment that you have set on the control
panel also with the regeneration adjustment switch. For example, if you have
adjusted to “3” in the control panel, also set the regeneration adjustment switch to
3.
Regeneration Adjustment Switch
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
1
1
2
3
4
5
If the hardness level of the water that you use is above 90°dF (French standard
for water hardness) or if you are using well water, than it is recommended to use
filter and water purification devices.If the hardness level of the water that you use
is below 7°dH, there is no need to use salt in your dishwasher. In this case, the
Salt Indicator light on the control panel of your dishwasher will light continuously.
If the water hardness is set to level 1, the Salt Indicator will light continuously
