/
15
/
60
EN
PreparatIon
Adding salt
C
Use only special softening
salts produced particularly
for the dishwashers in your
machine.
1. First take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir
of your machine only in initial use.
4. Add salt to the salt compartment.
To speed up dissolution rate of salt
in water, stir it with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when
the reservoir is full.
C
You need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing
the risk of corrosion in
machine. In cases where
you would not start washing
immediately, run your
machine empty in the
shortest program.
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in
water may take a couple
of hours. Therefore, Salt
Indicator remains on for a
while after adding salt into
the machine.
Detergent
You can use powder, tablet and liquid/
gel detergent in the machine.
A
Only use the detergents
produced particularly for
use with dishwashers in the
machine. We recommend
you not to use detergents
that contain chlorine and
phosphate as they are
harmful for the environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
although it is not necessary to use salt.
If you use salt under this condition, salt
will not be consumed and the lamp will
not illuminate.
C
When moving, you will
need to set the water
hardness level of your
dishwasher again according
to the information above,
depending on the water
hardness of the place you
have moved to.
If the water hardness level
of your machine is adjusted
previously, your machine
will display the most recent
hardness level adjustment.
