30 / EN
Dryer / User Manual
8
Troubleshooting
Drying process takes too much time.
• Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
• Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any)
that block ventilation in front of the ventilation grids.
• Ventilation may not be sufficient since the room where the machine is installed is very small. >>>
Open the door and windows of the room to avoid the room temperature increase too much.
• Lime deposit has built up on the dampness sensor. >>> Clean the dampness sensor.
• Excessive laundry might have been loaded in. >>> Do not overload the dryer.
• Laundry might not be spun sufficiently. >>> Spin your laundry at a higher speed in your washing
machine.
Laundry comes out wet at the end of drying.
• A programme suitable for the laundry type might have not been used.>>> Check the garment
tag and select a programme suitable for the fabric type or use the timer programmes additionally.
• Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
• Excessive laundry might have been loaded in. >>> Do not load the dryer in excess.
• Laundry might not be spun sufficiently. >>> Spin your laundry at a higher speed in your washing
machine.
Dryer does not switch on or the programme does not start. Dryer does not start when it is
set.
• It might have not been plugged in. >>> Make sure that the machine is plugged in.
• The loading door is ajar. >>> Make sure that the loading door is closed securely.
• Programme is not selected or the Start / Pause button is not pressed. >>> Make sure that the
programme is selected and it is not in the Pause position.
• "Child Lock" might have been activated. >>> Deactivate the Childproof Lock.
Programme is interrupted without any cause.
• The loading door might not be closed securely. >>> Push the loading door to close until you hear
a locking sound.
• A power failure might have occurred. >>> Press Start / Pause button to start the programme.
• Water tank may be full. >>> Drain the water tank.
Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type might have not been used. >>> Check the garment
tag and select a programme suitable for the fabric type.
Water leaks from the loading door.
• Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading
door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading
door gasket.
Loading door opens spontaneously.
• The loading door might not be closed securely. >>> Push the loading door to close until you hear
a locking sound.
Water Tank warning symbol is on/flashing.
• Water tank may be full. >>> Drain the water tank.
• Water draining hose might be bent. >>> If the product is connected directly to a wastewater
drain, check the water drain hose.
