25 / EN
Dryer / User Manual
Operating the Product
5.10 Changing the program after it is
started
• You can change the program you selected
to dry your laundry with a different program
after the drying machine starts running.
•
Press the
Start/Stand-by
button 1 second to stop
the program.
•
Select the new program using the Program
Selection button.
•
Press the
Start/Stand
-by button to start the
program.
Adding or removing laundry while the drying
machine is running
If you want to add or remove clothes to/from the
machine after the drying program starts:
•
Press the
Start/Stand-by
button to put the drying
machine in
Stand-by
state. The drying operation
stops.
•
Open the loading door while in Stand-by state, and
close the door after you remove or add laundry.
•
Press the
Start/Stand-by
button to start the
program.
C
Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
C
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
C
If a new program is selected by turning
the program selection knob while the
drying machine is in stand-by; the running
program terminates and new program
information is displayed on the screen.
Do not touch the inner surface of the drum
while adding or removing clothes during a
continuing program. Drum surface and the
drying air inside the drum are hot.
5.11 Cancelling the program
To cancel the program after the drying machine starts
running:
•
Press the
Start/Stand-by
button 1 second to
switch the program to standby mode and turn the
program button.
•
Program may also be cancelled by pressing the
On/Off/Cancel
button for 3 seconds.
A
The inside of the machine shall be
extremely hot when you cancel the
program during machine operation, so
run the Refreshing program to allow it to
cool down.
5.12 End of program
When the program has ended,
Fibre Filter Cleaning
and
Water Tank warning
symbols are illuminated
on the program monitoring indicator. Press
On /
Off/Cancel
button to turn off the drying machine.
C
2 hour-Wrinkle Prevention program is
activated if laundry isn't taken out of
machine after completion of the program.
C
Clean the fibre filter after each drying.
See 6.1 Cleaning of Fibre filter and
Loading door inner surface.
C
Empty the water tank after each drying.
See 6.3 Emptying the water tank
