26 / EN
Dryer / User Manual
6
Maintenance and cleaning
Service life of product extends and frequently
experienced problems will be reduced if it is cleaned at
regular intervals.
6.1 Cleaning Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to the air during
the drying cycle are collected in the Lint Filter.
C
Such fiber and lint are generally formed
during wearing and washing.
A
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and open
the lint filter.
• Clean lint, fiber, and cotton raveling by hand
or with a soft piece of cloth.
• Close the lint filter and place it back into its
housing.
• A layer can build up on the filter pores that
can cause clogging of the filter after using
the dryer for a while. Wash the lint filter with
warm water to remove the layer that builds
up on the lint filter surface. Dry the lint filter
completely before reinstalling it.
• Clean the entire inner surface of the loading
door and loading door gasket with a soft
damp cloth.
