14 / EN
Dryer / User Manual
3
Installation
Refer to the nearest Authorized Service Agent for
installation of the product. To make the product ready for
use, make sure that the electricity and water drainage
systems are appropriate by reading the information/
instructions given in the user manual before calling
the Authorized Service Agent. If they are not, call a
qualified technician and plumber to have any necessary
arrangements carried out.
C
Preparation of the product's location
as well as the electrical, clean water
and waste water installations is under
customer's responsibility.
B
CAUTION:
Installation and electrical
connections of the product must be
performed by the Authorized Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorized
persons.
A
CAUTION:
Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
3.1 Appropriate installation location
Install the product on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your product in a well ventilated,
dust-free environment.
• Do not block the air ducts in front of and
under the product with materials such as long
pile rugs, wooden blocks and bands.
• Do not install the product behind a door with a
lock, sliding door or a hinged door which can
strike the product.
• Once the product is installed, it should stay at
the same place where its connections have
been made. When installing the product,
make sure that the rear wall of it does not
touch anywhere (tap, socket, etc.). Also pay
attention to select an installation location
which you will not be required to change
afterwards.
• Place the product at least 1.5 cm away from
the edges of other furniture.
• The rear surface of the tumble dryer shall be
placed against a wall.
B
CAUTION:
Do not place the product on
top of the power cord.
3.2 Removing the transportation
safety assembly
A
CAUTION:
Remove the transportation
safety assembly before using the product
for the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum that contains a
piece of styrofoam. Hold it from its section marked
with
XX XX.
3. Pull the nylon towards yourself and remove the
transportation safety assembly.
A
CAUTION:
Check that no part of the
transportation safety assembly remains
inside the drum.
3.3 Under counter installation
This product can be installed under a counter if the
height of the counter is sufficient.
A
CAUTION:
While using the under counter
dryer, never operate the dryer without
under counter installation part.
Dryer Depth
60 cm
54 cm
Stock number of under-
bench installation part
2979700200
2973600200
Leave at least 3 cm of space around the sides and
the rear wall of the product when installing it
under a counter or in a cupboard.
