Safety and environment instructions
4 /36 EN
Refrigerator / User Guide
A
&MFDUSJDBMTBGFUZ
t
The product must be unplugged
during installation, maintenance,
cleaning, repairing and moving pro-
cedures.
t
If the power cable is damaged, it
must be replaced by a qualified per-
son specified by the manufacturer,
authorised service agent or importer
in order to avoid potential dangers.
t
Do not squeeze the power cable
under or behind the product. Do not
place heavy objects on the power
cable. Power cable must not be bent
excessively, pinched or get in contact
with any heat source.
t
Do not use extension cords, multi-
sockets or adapters to operate the
product.
t
Portable multi-sockets or portable
power sources can overheat and
cause fire. Therefore, do not keep
any multi-sockets behind or near the
product.
t
Plug must be easily accessible. If this
is not possible, the electrical instal-
lation to which the product is con-
nected must contain a device (such
as a fuse, switch, circuit breaker,
etc.) which conforms to the electrical
regulations and disconnects all poles
from the grid.
t
Do not touch the power plug with wet
hands.
t
Remove the plug from the socket by
gripping the plug and not the cable.
A
5SBOTQPSUBUJPOTBGFUZ
t
Product is heavy; do not move it
alone.
t
Do not hold its door when moving the
product.
t
Pay attention not to damage the cooling
system or the piping during transpor-
tation. If the piping is damaged, do not
operate the product and call the autho-
rised service agent.
A
*OTUBMMBUJPOTBGFUZ
t
Call the authorised service agent for
installation of the product. To make
the product ready for use, check the
information in the user manual to make
sure that the electricity and water ins-
tallations are suitable. If they are not,
call a qualified electrician and plumber
to have the necessary arrangements
made. Otherwise, there is the risk of
electric shock, fire, problems with the
product, or injury!
t
Prior to installation, check if the product
has any defects on it. If the product is
damaged, do not have it installed.
t
Place the product on a clean, flat and
solid surface and balance it with adjus-
table feet. Otherwise, the product may
tip over and cause injuries.
t
The installation location must be dry
and well ventilated. Do not place car-
pets, rugs or similar covers under the
product. Insufficient ventilation causes
the risk of fire!
t
Do not cover or block the ventilation
openings. Otherwise, power consump-
tion increases and your product may get
damaged.
t
Product must not be connected to
supply systems such as solar power
supplies. Otherwise, your product may
get damaged due to sudden voltage
changes!
