ARCAIR SLICE PACKAGE, Инструкция по безопасности и эксплуатации

Страница: 10 / 34

2-2
SLICE EXOTHERMIC CUTTING EQUIPMENT
89250848
2.03 Receipt Of Equipment
When you receive the equipment, check it against the invoice to make sure it is complete and inspect
the equipment for possible damage due to shipping. If there is any damage, notify the carrier immedi-
ately to file a claim. Furnish complete information concerning damage claims or shipping errors to the
location in your area listed in the inside back cover of this manual.
Include all equipment identification numbers as described above along with a full description of the
parts in error.
Move the equipment to the installation site before un-crating the unit. Use care to avoid damaging the
equipment when using bars, hammers, etc., to un-crate the unit.
2.03 Description
Arcair® SLICE® systems can cut, burn or pierce almost any metallic, non-metallic or composite mate-
rial. The SLICE exothermic torch cuts right through hard-to-cut materials such as mild, stainless and al-
loy steels, cast iron, aluminum, magnesium and other non-ferrous metals, slag and refractory materials,
and concrete or brick.
INTRODUCTION