Arcadia Vita System angolo 39/58, Руководство по установке

Страница: 6 / 31

6
Combustion air-side connection 9.
Arcadia Vita series fireplace inserts can be supplied with combustion air either directly from the
room or from the outdoors via a duct. Follow the instructions in the Arcadia Vita fireplace insert
manual when setting up the combustion air supply.
If the combustion air is fed in from outside through a duct, this can be routed from below or from the
rear wall, as desired. If the duct is routed in from the back, it will be necessary to make a cut-out in
an element of the system. For this purpose, there is a recess in the right position on the inside of the
cladding element which must be opened beforehand.
Proceed as follows when making the cut-out:
•
Place the jig in the interior recess and mark the centre point.
•
Drill through the centre point of the storage element with a conventional masonry drill, turn
the element over and draw a sector of a circle on the opposite site.
•
Drill a starting hole outside of circular contour and cut out the perforation with a
conventional jig saw.
Use stone cutting blades for this and maneuver around the cut-out at a low feed speed.