ARC FLEX Mini M, Инструкция по эксплуатации

Страница: 34 / 39

Flex Mini-M Instruction Manual
August 2021 v1.0
Page 33 of 38
PB3 PB4
PB5 P B6
P B8 PB7
START
Type 3
STOP
PB3 PB4
PB5 P B6
P B8 PB7
P B2
ON
OFF
Type 2
PB3 PB4
PB5 P B6
P B8 PB7
P B2
Type 1
PB1
5. Operating Procedure
General Operating Procedure
Keypad Type-1:
The transmitter is powered on and operated by pressing any pushbutton on the keypad
for up to 1 second (green on Status LED); the receiver MAIN outputs are also activated
(orange on Status LED). The Status LED blinks green when pushbuttons are pressed
thereafter. The transmitter goes into sleep mode with receiver MAIN outputs deactivated
after 5 minutes of inactivity (refer to section 3.1.6
Transmitter Inactivity Timer Settings).
Press any pushbutton for up to 1 second to wake up the transmitter (green on Status
LED) and reactivate the receiver MAIN outputs (orange on Status LED).
Keypad Type-2:
The transmitter is powered on by pressing the ON/OFF pushbutton for up to 1 second
(green on Status LED); the receiver MAIN outputs are also activated (orange on Status
LED). The Status LED blinks green when pushbuttons are pressed thereafter. The
transmitter goes into sleep mode with receiver MAIN outputs deactivated after 5 minutes
of inactivity (refer to section 3.1.6
Transmitter Inactivity Timer Settings). Press the
ON/OFF pushbutton (orange on Status LED) or any pushbuttons (green on Status LED)
to wake up the transmitter and reactivate the receiver MAIN outputs (refer to section
3.1.5 Transmitter START & ON/OFF Function Settings). Turn off the transmitter power
by pressing the ON/OFF pushbutton for up to 1 second (red on Status LED and then off);
the receiver MAIN outputs are also deactivated. The system will not work when pressing
any pushbuttons prior to executing the ON/OFF command (Status LED blinks 2 red).
Keypad Type-3:
The transmitter is powered on by pressing the START pushbutton for up to 1 second
(green on Status LED); the receiver MAIN outputs are also activated (orange on Status
LED). The same START pushbutton becomes an auxiliary function thereafter (refer to
section 3.2.3.1 and 3.2.4.4 START + AUX Normal Function). The Status LED blinks
green when pushbuttons are pressed thereafter. The transmitter goes into sleep mode
with receiver MAIN outputs deactivated after 5 minutes of inactivity (refer to section 3.1.6
Transmitter Inactivity Timer Settings). Press the START pushbutton (orange on Status
LED) or any pushbuttons (green on Status LED) to wake up the transmitter and
reactivate the receiver MAIN outputs (refer to section 3.1.5 Transmitter START &
ON/OFF Function Settings). Turn off the transmitter power by pressing the STOP
pushbutton for up to 1 second (red on Status LED and then off); the receiver MAIN
outputs are also deactivated. The system will not work when pressing any pushbuttons
prior to executing the START command (Status LED blinks 2 red).