ARC FLEX Mini M, Инструкция по эксплуатации

Страница: 21 / 39

Flex Mini-M Instruction Manual
August 2021 v1.0
Page 20 of 38
7 1 4 2 3 5 6 8
ON DIP
S3 DIP 1~6
1 2 3 4 5 6 7 8
ON DIP
INT
EXT
3.1.8 Infrared Programming
Other customized functions and settings not listed in this manual can be programmed
via the infrared IR programmer unit, such as the system serial number, frequency
range, new and updated functions and many others. Please contact ARC
representative for more details.
3.2 Receiver
3.2.1 Receiver Channel Settings
Set the receiver channel by configuring the S3 channel dipswitch located on the
RF/decoder board, only the first 6 dipswitch positions are used for channel
programming. The system channels table on section 3.2.7 illustrates which dipswitch
setting corresponds to which channel. Once the receiver channel is altered do make
sure to change the transmitter channel as well. The channel on both transmitter and
receiver must be identical in order for the system to work (refer to section 3.1.2
Transmitter Channel Settings).
Example:
Top position → “1”
Bottom position → “0”
The above dipswitch setting “1 0 0 1 0 0” corresponds to “channel 36” in the system
channels table on section 3.2.7.