ARC FLEX Mini M, Инструкция по эксплуатации

Страница: 13 / 39

Flex Mini-M Instruction Manual
August 2021 v1.0
Page 12 of 38
ON DIP
ON DIP
ON DIP
PB1 PB2
3. Function Settings
3.1 Transmitter
3.1.1 Transmitter Firmware Version
1. Set dipswitch position 7~9 to “100”.
2. Reinsert batteries and press any pushbutton to display
the transmitter firmware version with red, green and
orange blinks.
3. Exit firmware version mode by reset dipswitch position 7~9 to “ 000 ” .
3.1.2 Transmitter Channel Settings
1. Set dipswitch position 7~9 to “010”.
2. Reinsert batteries and press any pushbutton to proceed.
3. The Status LED displays current channel setting with red and green blinks. A green
blink represents the tens (+10) and a red blink represents the units (+1). For example,
1 green blink followed by 5 red blinks is channel 15.
4. Change transmitter channel by pressing PB1 to increment
the units (+1) and PB2 to increment the tens (+10). For
example, press PB2 two times and then PB1 four times is
channel 24 (Status LED blinks 2 greens and 4 reds). Make
sure the newly selected channel is shown on the Status
LED before proceeding to the next step below.
O
N
DI
P