ATD ArboTeamDevice
20
D
-
Wrap
the rope for at least four turns around the winch drum clockwise making a last
turn within the self tailer discs
E
-
Close
the stopper by rotating the lever down (figure 11)
F
- Insert
the winch handle into its specific fixing point (figure 1 n.16) and proceed to lift by
actionning manually the lever.
Figure 10 Figure 11
Clockwise rotation
: lifting capacity 46:1
Anticlockwise rotation
:
lifting capacity 22:1
LOWERING
G
- Once the lifting is finished,
unroll
carefully
the rope from the drum of the winch
keeping the rope perpendicular to the axis of the winch then
to start lowering wrap the rope
clockwise around the aluminium cylinder brake
with a number of turns proportionate to the
weight of the lifted section.
Pass the rope inside one of the rope guide hooks.
Firmly holding the rope, carefully open the stopper by moving the lever up and proceed to
lower the piece slowly and in a controlled manner.
LOWERING(different option)
Once the lifting operation finished, you can use the winch to lower the piece by proceeding
as shown in figure 12
