ATD ArboTeamDevice
17
•
nameplate
:
t
he nameplate which allows to identify the ATD must be intact and
readable
During use, check the tension of the straps.
Never leave the ATD unattended after installing it.
The rigging rope can be installed on the ATD as follows :
1)
with the stopper installed
(
mandatory when using the winch)
,
the rope must pass inside the stopper,
within the rope guide of the stopper's anchor plate
and
within the two rope guides below
it as shown in figure 6
Figure 6
2)
without the stopper installed
(rope lowered
on the
aluminium cylinder brake
)
The two rope guide hooks (left and right) are not to be used for redirecting the rope!
The rope must pass inside the two rope guides on entering the aluminium cylinder brake
and according to the needs, to the right or to the left (figure7)
