ATD ArboTeamDevice
18
Figure 7
Caution
In both cases described above the rigging rope must be lowered from above and reach the
ATD below the most vertically possible.
The stopper must be installed with a maximum total
range of 10 degrees as shown in figure 8 (5 degrees at right, 5 degrees at left and 5
frontwards).
Figure 8
If the rope does not fall vertically
, it is imperative to redirect
it the
by making it pass
through a
sling
combined with a pulley or
connector or a ring.(figure 9)
10°
10°
