Arbor Technology M1726, Руководство пользователя, Страница: 8 / 99

- vi -
Preface
IEC 60601-1/EN60601-1/EN60601-1-2
This product complies with the system standard IEC 60601-1 Medical Electrical
Equipment Part 1: General Requirements for Safety. And therefore, the product
is exclusively interconnected with IEC 60601-1 certified equipment in the pa -
tient environment.
Equipment connected to the analog or digital interfaces of the unit must comply
with the respective IEC standards (e.g. IEC 60601-1 for medical equipment).
Furthermore all configurations shall comply with the current version of the stan -
dard for SYSTEMS IEC 60601-1-1. Everybody who connects additional equip-
ment to the signal input part or signal output part configures a medical system,
and is therefore responsible that the system complies with current version of
the requirements of the system standard IEC 60601-1-1. If in doubt, consult the
technical service department or your local representative.
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.