Arbonia Sabiana Energy Smart Series, Инструкции по установке, использованию и обслуживанию

Страница: 6 / 58

6
English
07/03
2017
230V
50Hz
MAXIMUM
POWER INPUT
ENERGY- S
- - - W
QUALITY
CONTROL
MAXIMUN
CURRENT INPUT
ENY- S - ---
- - - A
SIZE
TYPE
IP21
MADE IN ITALY
SABIANA S.p.A
Via Piave 53 - 20011- Corbetta (MI) - ITALY
021B001
BEFORE INSTALLING THE APPLIANCE
READ THIS MANUAL CAREFULLY
Residential ventilation appliances convey outdoor air
through the cross-flow heat exchanger and distribute
it to the different rooms by means of a duct distribu-
tion system.
Moist and stale air is suctioned and then, again
passing through the cross-flow heat exchanger, is
exhausted to the outside of the appliance by residen-
tial ventilation.
There is an identification label on each appliance
bearing the data of the manufacturer and the
machine type (See Figure “A”).
- USE AND STORAGE
OF THE MANUAL
This instruction manual is intended for the machine
user, owner and technical installer and must always
be available for consultation.
The instruction manual indicates the intended use of
the machine, its technical features and provides indi-
cations as to its correct use, cleaning and adjustments.
It also provides important indications for maintenance,
for residual risks and anyhow to carry out operations
with particular attention.
This manual must be considered as a part of the ma-
chine and must be KEPT FOR FUTURE REFERENCE
until the final scrapping of the machine.
The instruction manual must always be available for
consultation and preserved in a dry and protected
area.
Should it be lost or damaged, the user can request a
new manual from the manufacturer or retailer, indi-
cating the model and serial number of the machine
shown on its rating plate.
This manual reflects the state of technology at the
moment it was drafted. The manufacturer reserves
the right to update production and following manuals
without being obliged to update previous versions
as well.
The manufacturer will not be held liable in case of:
- improper use or misuse of the machine
- use nonconforming to that expressly specified in
this publication
- serious shortcomings in intended and recommend-
ed maintenance
- changes to the machine or any unauthorised inter-
vention
- use of non-original spare parts or not specific for
the model
- total or partial failure to comply with the instruc-
tions
- Exceptional events
- SCOPE
MACHINE IDENTIFICATION
Consumables and replaced parts should
be disposed of safely and in accordance
with the environmental protection leg-
islation.
- WASTE DISPOSAL
Fig.
“
A
”