ARAG VISIO MULTIFLOW 4670611, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 32

20
9.9 DISPLAY SETTINGS
The main page shows the display divided into three horizontal parts.
Every sector can be assigned the desired value.
Options
Alarm tones
Keytones
Display settings
...
Open Display settings menu (Setup menu > Options > Display settings).
Press
OK to edit the selected menu item.
2
1
2
Display settings
Data 1
Data 2
Data 3
TOT 1 speed
1) Select desired value through .
2) Press OK to edit, or ESC to quit without saving.
2
1
2
Data 1
TOT 1 Surface
TOT 2 Distance
Flowrate
Speed
1) Set sector to the required value through .
2) Press OK to save, or ESC to quit without saving.
Carry out the same procedure for the other 2 values.
9.10 ID DELETION
This menu allows deleting the identification number (ID) of all the connected Orion Multiflows. Once this procedure is completed, the ID assignment
must be repeated in order to restore system correct operation.
Options
Keytones
Display settings
ID reset
...
Open the ID deletion menu (Setup menu > Options > ID deletion).
Press
OK to edit the selected menu item.
Options
Keytones
Display settings
ID reset
Confirm?
After selecting the item, you will be prompted to confirm deletion.