FIGURE 4
FIGURE 3
INSTRUCTIONS FOR 5000
S T E P 1
TURN THE GAME OFF AND UNPLUG FROM THE WALL OUTLET. UNLOCK AND REMOVE THE BACK DOOR FROM THE TOP CABINET.
S T E P 2
(SEE FIGURE 1) FROM THE BACK SIDE OF THE GAME: (A) DISCONNECT THE PIGTAIL RIBBONS FROM THE TARGET INTERFACE
BOARD. (B) REMOVE THE NUTS AND WASHERS FROM THE FOUR CORNER BOLTS HOLDING THE
TO THE CABINET. (C) REMOVE
THE DARTHEAD.
S T E P 3
(SEE FIGURE 2) (A) DISCONNECT YELLOW PLUG TO GAME SWITCHES. (B) DISCONNECT PLAYER CHANGE SWITCH FROM MAIN CIR-
CUIT BOARD. (C) REMOVE AND DISPOSE OF RIBBON CABLE BETWEEN LAMP BOARDS AND TARGET INTERFACE BOARD. (D) REMOVE
PLEXIGLASS FRONT (IT WILL BE NECESSARY TO REMOVE THE UPPER CABINET FROM LOWER CABINET FIRST). (E) REMOVE REMAINING
NUTS AND
BOLTS THAT HELD THE DART HEAD TO THE TOP (THESE WILL NOT BE REUSED).
S T E P 4
(SEE FIGURE 3) CUT 9
FROM THE BOTTOM OF THE PLEXIGLASS FRONT. BE CAREFUL NOT TO SCRATCH THE GRAPHICS.
REINSTALL THE LOWER PORTION TO THE UPPER CABINET. THE TOP PORTION WILL NOT BE REUSED.
S T E P 5
(SEE FIGURE 4) (A) SCREW TWO OF THE FOUR
X 2
THREADED RODS INTO THE LEFT SIDE OF THE WEB. (B) THE TWO
LONGER
X 2
THREADED RODS SCREW INTO THE RIGHT SIDE OF THE WEB. (C) PLACE THE WEB AGAINST THE FRONT OF THE
GAME, WITH THE RODS GOING THROUGH TO THE BACK. (D) USE THE 4 NUTS REMOVED IN STEP 3, FIGURE 2, TO SECURE THE WEB TO THE
CABINET. IT IS POSSIBLE DUE TO MANUFACTURING TOLERANCES THAT THE 4 HOLES (FOR THE RODS) MIGHT HAVE TO BE ENLARGED TO
CENTER THE WEB TO THE DART HEAD HOLE IN THE CABINET. REINSTALL THE DART HEAD USING ORIGINAL HARDWARE. RE-CONNECT THE 3
MATRIX LEADS TO THE TARGET INTERFACE BOARD, THE YELLOW PLUG FOR THE GAME SWITCHES, AND THE PLAYER CHANGE SWITCH.
S T E P 6
(SEE FIGURE 5) USING THE 4 HOLES IN THE WEB AS GUIDES, (A) DRILL 4 HOLES
THROUGH THE TOP OF THE
CABINET FROM THE FRONT. (B) INSTALL THE 4 WOOD SCREWS TO HOLD THE WEB CORNERS TO THE TOP CABINET.
S T E P 7
REPLACE THE WING NUTS ON THE LONGER
THE BACK DOOR,
WEB KIT BILL OF MATERIAL
QUANTITY
P A R T N O .
D E S C R I P T I O N
SIZE
U S A G E
1 ’
WEB
6000 SERIES
00-4500-33
WEB
4500
SERIES
4
WOOD SCREWS
X 1
A L L
4
THREADED ROD
X 2
5 0 0 0 U S E 2 ONLY
2
THREADED ROD
X 2
5000 SERIES
16-0071
D E C A L
6000 SERIES
1
I N S T R U C T I O N S
A L L
l
ONLY ONE WEB IS SUPPLIED
l
* SUPPLIED IN 6000 WEB KITS ONLY
Revision B 38-0008
1988 Arachnid, Inc.
