manualshive.com logo in svg

AR 10013130, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
AR 10013130 Скачать руководство пользователя страница 67

WARRANTIES:  LIMITATION OF LIABILITY

 

Seller warrants (i) that seller has title to the goods sold and (ii) that Amplifiers (all 
parts excluding traveling wave and vacuum tubes), Antennas, Transient Generators, 
Power Meters, Directional Couplers, Field Monitoring Equipment, Conducted 
Immunity Generators, Signal Generators and Tripods will be free from defects in 
material and workmanship for a period of three (3) years from date of shipment 
shown on AR RF/Microwave Instrumentation invoice. Traveling Wave Tubes in the 
200T2G8A, 250T1G3 and 250T8G18 will be free from defects in material and 
workmanship for a period of two (2) years from date of shipment. Vacuum tubes in 
the ‘L’ series amplifiers, other traveling-wave tubes in models not previously listed 
and power heads will be free from defects in material and workmanship for a period 
of one (1) year. Contact AR RF/Microwave Instrumentation for warranty information 
regarding items not listed.  Seller’s sole responsibility in fulfilling these warranties 
shall be to repair or replace any goods which do not conform to the foregoing 
warranties  or, at seller’s option, to give buyer credit for defective goods.  The 
warranty is valid only when used in the country specified at time of order.  Warranty 
service must be obtained from the repair facility designated at that time.  If warranty 
service is not available in the country where the equipment is to be used, it must be 
returned to AR RF/Microwave Instrumentation.  Warranty service will be provided 
only for defective goods which are returned within the warranty period, freight costs 
prepaid to AR RF/Microwave Instrumentation or its designated repair facility. 

There are no other warranties, express or implied, including any warranty of 
merchantability or fitness.  Seller shall not be responsible for any incidental or 
consequential damages arising from any breach of warranty. 

No person other than an officer of Amplifier Research Corporation, has any authority 
to bind seller to any affirmation, representation or warranty except as specifically 
included in the preceding terms and conditions. 

REV0611 

Содержание 10013130





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды