AR 10013130, Руководство по эксплуатации и обслуживанию

Страница: 32 / 68

Model 2000TP2G8B
22 Rev -
Table 3-3. Catalog of IEEE-488 Commands
Command Function Units Response format
RDSTAT
Returns status code of processing of previous command
(see Table 3-4)
STATUS=[ ]
RDFLT Returns system fault code (see Table 3-5) flt=[ ]
SYSTEM:ON;
Emulates pressing the System ON button from System
OFF (Exit Sleep Mode)
SYSTEM:OFF;
Emulates pressing the Power Save button. (Enter Sleep
Mode)
OPERATE; Emulates OPERATE push-button
STANDBY; Emulate STANDBY push-button
POWER:OFF; Emulate STANDBY push-button
RESET; Emulates RESET softkey
RDS/N Returns serial number s/n=[ ]
RDCONHR Returns console hours ConHr=[ ]
RDRFHR Returns RF hours RfHr=[ ]
RDEK Returns cathode voltage KV Ek=[ ]
RDEB Returns collector voltage KV Eb=[ ]
RDEG Return grid voltage V Eg=[ ]
RDEF Returns heater voltage V Ef=[ ]
RDIF Returns heater current A If=[ ]
RDIW Returns helix current mA Iw=[ ]
RDTMPTWTF Returns TWT temp (°F) °F TWTF=[ ]F
RDTMPTWTC Returns TWT temp (°C) °C TWTC=[ ]C
RDTMPPSF Returns power supply temp (°F) °F PSF=[ ]F
RDTMPPSC Returns power supply temp (°C) °C PSC=[ ]C
RDTWTOTF Returns TWT overtemp warning setpoint (°F) °F TWTOTF=[ ]F
STWTOTF Sets TWT overtemp warning setpoint (°F) °F
RDTWTOTC Returns TWT overtemp warning setpoint (°C) °C TWTOTC=[ ]C
STWTOTC Sets TWT overtemp warning setpoint (°C) °C
RDPSOTF Returns power supply overtemp warning setpoint (°F) °F PSOTF=[ ]F
SPSOTF Sets p. s. overtemp warning setpoint (°F) °F
RDPSOTC Returns p. s. overtemp warning setpoint (°C) °C PSOTC=[ ]C
SPSOTC Sets p. s. overtemp warning setpoint (°C) °C
RDIWOC Returns helix overcurrent warning setpoint mA IwOC=[ ]
SIWOC Sets helix overcurrent warning setpoint mA
RDLOGIC Returns logic state code (see Table 3-6)
Sys=[ ]
RDA Returns gain %
A=[ ]
SA Sets gain
%
RDHTDREM Returns remaining heater time delay
sec. HTD=[ ]s
RDPODP Returns forward power out (dBm) Peak dBm Po=[ ]dBm Pk
RDPOWP Returns forward power out (W) Peak watts Po=[ ]W Pk
RDPOD Returns forward power out (dBm) Average dBm Po=[ ]dBm Avg
RDPOW Returns forward power out (W) Average watts Po=[ ]W Avg